Cisco SFP-10G-BXD-I= network transceiver module Fiber optic 10000 Mbit/s SFP+ 1330 nm
10GBASE-BX10-D SFP+ bidirectional transceiver module for 10km, tx1330nm/rx1270nm
Out of stock
SKU
SFP-10G-BXD-I
Details
Cisco SFP-10G-BXD-I=. SFP transceiver type: Fiber optic, Maximum data transfer rate: 10000 Mbit/s, Interface type: SFP+. Certification: MSA. Width: 13.4 mm, Depth: 56.5 mm, Height: 8.5 mm. Number of products included: 1 pc(s)
The Cisco SFP-10G-BXD-I and SFP-10G-BXU-I SFPs operate on a single strand of standard SMF.
A SFP-10G-BXD-I device is always connected to a SFP-10G-BXU-I device with a single strand of standard SMF with an operating transmission range up to 10 km.
The communication over a single strand of fiber is achieved by separating the transmission wavelength of the two devices. SFP-10G-BXD-I transmits a 1330-nm channel and receives a 1270-nm signal, whereas SFP-10G-BXU-I transmits at a 1270-nm wavelength and receives a 1330-nm signal. The presence of a wavelength-division multiplexing (WDM) splitter integrated into the SFP to split the 1270-nm and 1330-nm light paths.
The Cisco SFP-10G-BXD-I and SFP-10G-BXU-I SFPs operate on a single strand of standard SMF.
A SFP-10G-BXD-I device is always connected to a SFP-10G-BXU-I device with a single strand of standard SMF with an operating transmission range up to 10 km.
The communication over a single strand of fiber is achieved by separating the transmission wavelength of the two devices. SFP-10G-BXD-I transmits a 1330-nm channel and receives a 1270-nm signal, whereas SFP-10G-BXU-I transmits at a 1270-nm wavelength and receives a 1330-nm signal. The presence of a wavelength-division multiplexing (WDM) splitter integrated into the SFP to split the 1270-nm and 1330-nm light paths.
More Information
Fiber cable diameters supported (core/cladding) | 9/125 µm |
---|---|
Single-mode fiber (SMF) supported | Yes |
SFP transceiver type | Fiber optic |
Maximum data transfer rate | 10000 Mbit/s |
Interface type | SFP+ |
Fiber optic connector | LC |
SFP transceiver standard | BX |
Maximum transfer distance | 10000 m |
Wavelength | 1330 nm |
Networking standards | IEEE 802.3,IEEE 802.3ab,IEEE 802.3ae,IEEE 802.3u |
Cabling technology | 10GBASE-BXD |
Auto MDI/MDI-X | Yes |
Hot-Plug support | Yes |
Certification | MSA |
Operating temperature (T-T) | -40 - 85 °C |
Storage temperature (T-T) | -40 - 85 °C |
Operating relative humidity (H-H) | 0 - 95% |
Storage relative humidity (H-H) | 0 - 95% |
Width | 13.4 mm |
Depth | 56.5 mm |
Height | 8.5 mm |
Number of products included | 1 pc(s) |
Product Condition | Empty |
Product Sku | SFP-10G-BXD-I |
Reviews
{{title}}
{{{detail}}}
No reviews yet ...
Have an opinion? Help others decide. Share your knowledge about this product by submitting a review.
{{/items}}
{{#previousPage}}
Previous Page
{{/previousPage}}
{{#load-more-src}}
Next Page
{{/load-more-src}}
★★★★★
★★★★★