JG933A HPe 5130 24G SFP 4 SFP+ Switch Managed L3
JG933A, a HPE 5130 24G SFP switch. 4SFP+ EI - 16x SFP 100/1000, 8x SFP dual-personality, 4x SFP+, no PSU.
Out of stock
SKU JG933A
Details
Hewlett Packard Enterprise 5130-24G-SFP-4SFP+ EI. Switch type: Managed, Switch layer: L3. Console port: RJ-45. MAC address table: 16384 entries, Switching capacity: 128 Gbit/s. Networking standards: IEEE 802.3,IEEE 802.3ab,IEEE 802.3u. Rack mounting, Form factor: 1U
The HP 5130 EI Switch Series is comprised of Gigabit Ethernet switches that support static and RIP Layer 3 routing, diversified services, and IPv6 forwarding, as well as provide four 10-Gigabit Ethernet (10GbE) extended interfaces. Unique Intelligent Resilient Framework (IRF) technology creates a virtual fabric by managing several switches as one logical device, which increases network resilience, performance, and availability, while reducing operational complexity. These switches provide Gigabit Ethernet access and can be used at the edge of a network or to connect server clusters in data centers. High availability, simplified
management, and comprehensive security control policies are among the key features that distinguish this series.
The HP 5130 EI Switch Series is comprised of Gigabit Ethernet switches that support static and RIP Layer 3 routing, diversified services, and IPv6 forwarding, as well as provide four 10-Gigabit Ethernet (10GbE) extended interfaces. Unique Intelligent Resilient Framework (IRF) technology creates a virtual fabric by managing several switches as one logical device, which increases network resilience, performance, and availability, while reducing operational complexity. These switches provide Gigabit Ethernet access and can be used at the edge of a network or to connect server clusters in data centers. High availability, simplified
management, and comprehensive security control policies are among the key features that distinguish this series.
More Information
| Rack mounting | Yes |
|---|---|
| Form factor | 1U |
| Product colour | Black |
| Switch type | Managed |
| Switch layer | L3 |
| Quality of Service (QoS) support | Yes |
| Console port | RJ-45 |
| SFP+ module slots quantity | 4 |
| SFP module slots quantity | 24 |
| IP routing | Yes |
| Networking standards | IEEE 802.3,IEEE 802.3ab,IEEE 802.3u |
| 10G support | No |
| Broadcast storm control | Yes |
| Link aggregation | Yes |
| Flow control support | Yes |
| Spanning tree protocol | Yes |
| VLAN support | Yes |
| Latency (1 Gbps) | 5 µs |
| MAC address table | 16384 entries |
| Switching capacity | 128 Gbit/s |
| Throughput | 96 Mpps |
| Latency (10 Gbps) | 1.5 µs |
| Packet buffer memory | 1.5 MB |
| DHCP features | DHCP server,DHCP client |
| Access Control List (ACL) | Yes |
| IGMP snooping | Yes |
| Multicast support | Yes |
| Noise level | 50.7 dB |
| Memory type | SDRAM |
| Internal memory | 1024 MB |
| Flash memory | 128 MB |
| Power supply included | No |
| Power over Ethernet (PoE) | No |
| Operating temperature (T-T) | 0 - 45 °C |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating relative humidity (H-H) | 10 - 90% |
| Storage relative humidity (H-H) | 5 - 95% |
| Heat dissipation | 204 BTU/h |
| Width | 440 mm |
| Depth | 360 mm |
| Height | 43.6 mm |
| Weight | 8 kg |
| Channel Product Sku | JG933A |
Reviews
{{title}}
{{{detail}}}
No reviews yet ... Have an opinion? Help others decide. Share your knowledge about this product by submitting a review.
{{/items}} {{#previousPage}} Previous Page {{/previousPage}} {{#load-more-src}} Next Page {{/load-more-src}}
★★★★★
★★★★★