Hewlett Packard Enterprise 5510 Managed L3 Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) 1U Black
SKU
JH147A
Out of stock
Only %1 left
Overview
HPE FlexNetwork 5510, 2 GB SDRAM, 512 MB flash, 100–240 VAC, 50/60 Hz, 43.99 x 46 x 4.37 cm
Hewlett Packard Enterprise 5510. Switch type: Managed, Switch layer: L3. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000), Basic switching RJ-45 Ethernet ports quantity: 24, USB 2.0 ports quantity: 1, Console port: RJ-45. Full duplex. Switching capacity: 288 Gbit/s. Networking standards: IEEE 802.3, IEEE 802.3ab, IEEE 802.3at, IEEE 802.3u. Power over Ethernet (PoE). Rack mounting, Form factor: 1U
The HPE FlexNetwork 5510 HI Switch Series delivers outstanding resiliency, security, and multiservice support for medium and large enterprise networks. This switch includes enterprise-class QoS; dual, redundant power supplies with support for PoE+; 10GbE and 40GbE uplinks; 9 chassis IRF stacking; Static & RIP Routing, MACsec, OSPF, IPv6 and Energy Efficient Ethernet. The 5510 HI offers advanced technologies including OAM, CFD, multi-level QoS, MPLS, and VPLS. It can be managed with the HPE Intelligent Management Center (IMC) Software for a single view of your entire network. Features Highly Resilient, More Secure, and Scalable Access Layer Switches The HPE FlexNetwork 5510 HI Switch Series delivers outstanding resiliency, security, and multiservice support capabilities for traditional large enterprise networks. Advanced technologies include OAM, CFD, RRPP, BFD, Multi-level QoS, MPLS, and VPLS. The HPE Intelligent Resilient Framework (IRF) virtualizes up to nine physical switches into one logical device for simpler, flatter, more agile networks. Offers scalable stacking with both built-in and modular 10GbE uplinks and 40GbE for high capacity, back-haul connectivity. Dual, redundant, hot-swappable power supplies keep your network up and running and deliver up to 1440 Watt of PoE+ for powered cameras, phones and wireless access points. The 5510 HI has IPv6 support and fully featured Layer 3 functionality, including RIP, OSPF, ISIS, BGP, and PIM with no software licensing required. Powerful Performance The HPE FlexNetwork 5510 HI Switch Series provides higher levels of security with hardware-based, wire-speed access control lists (ACLs). Provides simple administration without impacting network performance offering feature-rich TCAM-based ACL implementation. Non-blocking architecture delivers up to 336 Gb/s of wire-speed switching with a non-blocking switching fabric and up to 250 million pps throughput. Robust Quality of Service (QoS) The HPE FlexNetwork 5510 HI Switch Series supports advanced classifier-based QoS which directs traffic using multiple match criteria based on Layer 2, 3, and 4 information and applies QoS policies such as setting priority level and rate limit to selected traffic on a port, VLAN, or whole switch. Creates traffic classes based on ACLs, IEEE 802.1p precedence, IP, and DSCP or Type of Service (ToS) precedence. Supports filter, redirect, mirror, or remark. Get extensive traffic prioritization with congestion actions: strict priority (SP) queuing, weighted round robin (WRR), weighted fair queuing (WFQ), weighted random early discard (WRED), weighted deficit round robin (WDRR), SP+WDRR, and SP+WFQ. Comprehensive Security Control and a Single View of the Network The HPE FlexNetwork 5510 HI Switch Series supports flexible authentication methods including 802.1X, MAC, and Web authentication for greater security and policy-driven application authentication. Offers identity-driven security and access control with automatic VLAN assignment and per-user ACLs allow access to specific network services without risking network security. Security features include: IP source guard, DHCPv6 snooping, STP BPDU port protection, RADIUS/HWTACACS, and SSL. Supports MACsec for greater end-point or switch-to-switch security. Can be seamlessly managed with HPE Intelligent Management Center (IMC) to provide end-to-end network transparency with consistent network experience through comprehensive configuration, compliance and policy management. RMON and sFlow provide advanced monitoring and reporting capabilities for statistics, history, alarms and events.
The HPE FlexNetwork 5510 HI Switch Series delivers outstanding resiliency, security, and multiservice support for medium and large enterprise networks. This switch includes enterprise-class QoS; dual, redundant power supplies with support for PoE+; 10GbE and 40GbE uplinks; 9 chassis IRF stacking; Static & RIP Routing, MACsec, OSPF, IPv6 and Energy Efficient Ethernet. The 5510 HI offers advanced technologies including OAM, CFD, multi-level QoS, MPLS, and VPLS. It can be managed with the HPE Intelligent Management Center (IMC) Software for a single view of your entire network. Features Highly Resilient, More Secure, and Scalable Access Layer Switches The HPE FlexNetwork 5510 HI Switch Series delivers outstanding resiliency, security, and multiservice support capabilities for traditional large enterprise networks. Advanced technologies include OAM, CFD, RRPP, BFD, Multi-level QoS, MPLS, and VPLS. The HPE Intelligent Resilient Framework (IRF) virtualizes up to nine physical switches into one logical device for simpler, flatter, more agile networks. Offers scalable stacking with both built-in and modular 10GbE uplinks and 40GbE for high capacity, back-haul connectivity. Dual, redundant, hot-swappable power supplies keep your network up and running and deliver up to 1440 Watt of PoE+ for powered cameras, phones and wireless access points. The 5510 HI has IPv6 support and fully featured Layer 3 functionality, including RIP, OSPF, ISIS, BGP, and PIM with no software licensing required. Powerful Performance The HPE FlexNetwork 5510 HI Switch Series provides higher levels of security with hardware-based, wire-speed access control lists (ACLs). Provides simple administration without impacting network performance offering feature-rich TCAM-based ACL implementation. Non-blocking architecture delivers up to 336 Gb/s of wire-speed switching with a non-blocking switching fabric and up to 250 million pps throughput. Robust Quality of Service (QoS) The HPE FlexNetwork 5510 HI Switch Series supports advanced classifier-based QoS which directs traffic using multiple match criteria based on Layer 2, 3, and 4 information and applies QoS policies such as setting priority level and rate limit to selected traffic on a port, VLAN, or whole switch. Creates traffic classes based on ACLs, IEEE 802.1p precedence, IP, and DSCP or Type of Service (ToS) precedence. Supports filter, redirect, mirror, or remark. Get extensive traffic prioritization with congestion actions: strict priority (SP) queuing, weighted round robin (WRR), weighted fair queuing (WFQ), weighted random early discard (WRED), weighted deficit round robin (WDRR), SP+WDRR, and SP+WFQ. Comprehensive Security Control and a Single View of the Network The HPE FlexNetwork 5510 HI Switch Series supports flexible authentication methods including 802.1X, MAC, and Web authentication for greater security and policy-driven application authentication. Offers identity-driven security and access control with automatic VLAN assignment and per-user ACLs allow access to specific network services without risking network security. Security features include: IP source guard, DHCPv6 snooping, STP BPDU port protection, RADIUS/HWTACACS, and SSL. Supports MACsec for greater end-point or switch-to-switch security. Can be seamlessly managed with HPE Intelligent Management Center (IMC) to provide end-to-end network transparency with consistent network experience through comprehensive configuration, compliance and policy management. RMON and sFlow provide advanced monitoring and reporting capabilities for statistics, history, alarms and events.
Rack mounting | Yes |
---|---|
Stackable | Yes |
Form factor | 1U |
Colour of product | Black |
Traffic shaping | Yes |
Switch type | Managed |
Switch layer | L3 |
Quality of Service (QoS) support | Yes |
Web-based management | Yes |
Basic switching RJ-45 Ethernet ports quantity | 24 |
Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
SFP+ module slots quantity | 4 |
Console port | RJ-45 |
USB 2.0 ports quantity | 1 |
Networking standards | IEEE 802.3, IEEE 802.3ab, IEEE 802.3at, IEEE 802.3u |
10G support | Yes |
Port mirroring | Yes |
Full duplex | Yes |
Auto MDI/MDI-X | Yes |
Broadcast storm control | Yes |
Flow control support | Yes |
VLAN support | Yes |
Switching capacity | 288 Gbit/s |
Throughput | 214 Mpps |
Latency (10-100 Mbps) | 5 µs |
Latency (1 Gbps) | 5 µs |
Latency (10 Gbps) | 3 µs |
Jumbo frames support | Yes |
Packet buffer memory | 4 MB |
Multicast MAC address table | 32768 entries |
Multicast support | Yes |
Physical stacking (units) | 9 |
Internal memory | 2048 MB |
Flash memory | 512 MB |
AC input voltage | 100 - 240 V |
AC input frequency | 50 - 60 Hz |
Power over Ethernet (PoE) | Yes |
Operating temperature (T-T) | 0 - 45 °C |
Storage temperature (T-T) | -40 - 70 °C |
Operating relative humidity (H-H) | 10 - 90% |
Storage relative humidity (H-H) | 5 - 95% |
Width | 440 mm |
Depth | 460 mm |
Height | 43.7 mm |
Harmonized System (HS) code | 85176990 |
Product Condition | Empty |
Product Sku | JH147A |
Not found what you wanted?
Flux IT hardware can help you find the right product quickly and easily. Tell us what you wanted?
In a hurry? Use Live Chat or Call us 01992 576522 now.
Need project equipment purchase pricing or you have multiple items to buy, submit your RFQ.
Why buy from us?
Flux is the future of IT procurement:
- Huge stock of current and EOL products available to ship today
- Fully tested with a choice of warranties available for peace of mind purchasing
- Trade you old equipment for new
- Located close to central London for same day emergency deliveries
- Choice of warranties to meet your requirements
- Short lead time and worldwide deliveries
Looking to Sell a JH147A?
Flux IT Hardware offers IT Asset Disposition services designed to assist consumers and organizations alike, who are looking to sell their equipment.
- Get a fair market value offer.
- Fast payments via BACS.
- Single or multiple quantities.
In a hurry? Use Live Chat or Call us 01992 576522 now.
See how simple it is:
Looking to buy JH147A in larger quantity?
Simply tells us how many units are required. We’ll you get the best pricing and lead time for 5 or more units of JH147A from our established UK and European network of suppliers.
In a hurry? Use Live Chat or Call us 01992 576522 now.
Project Inquiry & Support
- Get a quote fast
- Project based price savings
- Professional service