JX939A HPE ARUBA IAP-304 INSTANT Access Point

Hewlett Packard Enterprise Aruba Instant IAP-304 (RW). Maximum data transfer rate: 1300 Mbit/s, Networking standards: IEEE 802.11ac,IEEE 802.11n, Ethernet LAN data rates: 10,100,1000 Mbit/s. Antenna connector type: RP-SMA. Placement: Ceiling,Wall, Product colour: White. Width: 165 mm, Depth: 165 mm, Height: 38 mm

The Aruba 300 Series APs offer a choice of operating modes to meet your unique management and deployment requirements.
Controller-managed mode – When managed by Aruba Mobility Controllers, Aruba 300 Series APs offer centralized configuration, data encryption, policy enforcement and network services, as well as distributed and centralized traffic forwarding
Aruba Instant mode – In Aruba Instant mode, a single AP automatically distributes the network configuration to other Instant APs in the WLAN. Simply power-up one Instant AP, configure it over the air, and plug in the other APs – the entire process takes about five minutes. If WLAN requirements change, a built-in migration path allows 300 Series Instant APs to become part of a WLAN that is managed by a Mobility Controller
Remote AP (RAP) for branch deployments
Air monitor (AM) for wireless IDS, rogue detection and containment
Spectrum analyzer, dedicated or hybrid, for identifying sources of RF interference
Secure enterprise mesh
For large installations across multiple sites, the Aruba Activate service significantly reduces deployment time by automating device provisioning, firmware upgrades, and inventory management. With Aruba Activate, the Instant APs are factory-shipped to any site and configure themselves when powered up.