Out of stock
Only %1 left
Overview
J9856A, a HPE Aruba 2530-24G-2SFP+ Switch. HP 2530-24G-2SFP+ - 24 RJ-45 10/100/1000, 2 SFP+ 1000/10000 SFP+, ARM9E 800 MHz; 128 MB, 256 MB DDR3 DIMM, 65.4 Mpps, 88 Gb/s, 2.81 kg.
All our Refurbished networking and server hardware.
- Are fully tested
- Include 2 Year warranty
- Next business day delivery
Call about...
- Sameday delivery within M25 area
- Payment by company PO's
- Gov & Educational bodies prices
- Short term rental prices
Hewlett Packard Enterprise 2530-24G-2SFP+. Switch type: Managed, Switch layer: L2. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000), Basic switching RJ-45 Ethernet ports quantity: 24. Full duplex. MAC address table: 16000 entries, Switching capacity: 88 Gbit/s. Networking standards: IEEE 802.3,IEEE 802.3ab,IEEE 802.3u. Rack mounting
The HP 2530 Switches Series provides security, reliability, and ease of use for enterprise edge, branch office, and SMB deployments. Fully managed switches deliver full Layer 2 capabilities with optional PoE+, 10GbE uplinks, enhanced access security, traffic prioritization, sFlow, IPv6 host support, and include Lifetime Warranty 2.0. The HP 2530 Switch Series is easy to use and deploy, and can be manages with the HP Intelligent Management Center (IMC) for a single view of your entire network.
Features
Cost-Effective, Reliable and Secure Access Layer Switches
The HP 2530 Switch Series provides secure, reliable and ease of use for enterprise edge, branch office, and SMB deployments.
Fully managed switches deliver full Layer 2 capabilities with optional PoE+, 10GbE uplinks, enhanced access security, traffic prioritization, sFlow, IPv6 host support, and include Lifetime Warranty 2.0.
Right size deployment with choice of 8, 24, and 48 port models available with Gigabit or Fast Ethernet ports, optional PoE+ and optional 10GbE uplinks.
Power savings with fanless models, Energy Efficient Ethernet (IEEE 802.3az), and ability to disable LEDs and enable port low power mode.
Lifetime Warranty 2.0 with 3 years 24x7 phone support and no software licensing required.
Security and Quality of Service
The HP 2530 Switch Series supports flexible authentication methods including 802.1X, MAC, and Web Authentication for greater security and policy-driven application authentication.
Advanced denial of service (DOS) protection, such as DHCP Protection, Dynamic ARP protection, and Dynamic IP lockdown, and flexible traffic controls include ACLs and QoS.
Traffic prioritization with IEEE 802.1p allows real-time traffic classification with support for eight priority levels mapped to either two or four queues; uses weighted deficit round robin (WDRR) or strict priority (SP).
Simple Deployment and Management
The HP 2530 Switch Series supports choice of management interface with Web GUI, command-line interface (CLI) and Simple Network Management Protocol (SNMP), using console or micro USB ports.
Quiet operation with fanless and variable speed fan models.
Flexible deployment with wall, table, and rack mounting options.
Single View of the Network
The HP 2530 Switch Series can be seamlessly managed with HP Intelligent Management Center (IMC) to provide end-to-end network transparency with consistent network experience through comprehensive configuration, compliance and policy management.
RMON, and sFlow provide advanced monitoring and reporting capabilities for statistics, history, alarms and events.
The HP 2530 Switches Series provides security, reliability, and ease of use for enterprise edge, branch office, and SMB deployments. Fully managed switches deliver full Layer 2 capabilities with optional PoE+, 10GbE uplinks, enhanced access security, traffic prioritization, sFlow, IPv6 host support, and include Lifetime Warranty 2.0. The HP 2530 Switch Series is easy to use and deploy, and can be manages with the HP Intelligent Management Center (IMC) for a single view of your entire network.
Features
Cost-Effective, Reliable and Secure Access Layer Switches
The HP 2530 Switch Series provides secure, reliable and ease of use for enterprise edge, branch office, and SMB deployments.
Fully managed switches deliver full Layer 2 capabilities with optional PoE+, 10GbE uplinks, enhanced access security, traffic prioritization, sFlow, IPv6 host support, and include Lifetime Warranty 2.0.
Right size deployment with choice of 8, 24, and 48 port models available with Gigabit or Fast Ethernet ports, optional PoE+ and optional 10GbE uplinks.
Power savings with fanless models, Energy Efficient Ethernet (IEEE 802.3az), and ability to disable LEDs and enable port low power mode.
Lifetime Warranty 2.0 with 3 years 24x7 phone support and no software licensing required.
Security and Quality of Service
The HP 2530 Switch Series supports flexible authentication methods including 802.1X, MAC, and Web Authentication for greater security and policy-driven application authentication.
Advanced denial of service (DOS) protection, such as DHCP Protection, Dynamic ARP protection, and Dynamic IP lockdown, and flexible traffic controls include ACLs and QoS.
Traffic prioritization with IEEE 802.1p allows real-time traffic classification with support for eight priority levels mapped to either two or four queues; uses weighted deficit round robin (WDRR) or strict priority (SP).
Simple Deployment and Management
The HP 2530 Switch Series supports choice of management interface with Web GUI, command-line interface (CLI) and Simple Network Management Protocol (SNMP), using console or micro USB ports.
Quiet operation with fanless and variable speed fan models.
Flexible deployment with wall, table, and rack mounting options.
Single View of the Network
The HP 2530 Switch Series can be seamlessly managed with HP Intelligent Management Center (IMC) to provide end-to-end network transparency with consistent network experience through comprehensive configuration, compliance and policy management.
RMON, and sFlow provide advanced monitoring and reporting capabilities for statistics, history, alarms and events.
| Rack mounting | Yes |
|---|---|
| Stackable | Yes |
| Product colour | Stainless steel |
| Switch type | Managed |
| Switch layer | L2 |
| Quality of Service (QoS) support | Yes |
| MIB support | Yes |
| SFP+ module slots quantity | 2 |
| Basic switching RJ-45 Ethernet ports quantity | 24 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Networking standards | IEEE 802.3,IEEE 802.3ab,IEEE 802.3u |
| Full duplex | Yes |
| VLAN support | Yes |
| Number of VLANs | 512 |
| Latency (10-100 Mbps) | 7.3 µs |
| Latency (1 Gbps) | 2.7 µs |
| MAC address table | 16000 entries |
| Switching capacity | 88 Gbit/s |
| Throughput | 65.4 Mpps |
| Latency (10 Gbps) | 2.2 µs |
| Jumbo frames support | Yes |
| Packet buffer memory | 1.5 MB |
| DHCP features | DHCP server |
| Access Control List (ACL) | Yes |
| Security algorithms | 802.1x RADIUS,SSL/TLS |
| SSH/SSL support | Yes |
| Management protocols | SNMPv3 |
| Noise level | 29.4 dB |
| Virtual stacking (units) | 16 |
| Built-in processor | Yes |
| Processor model | ARM9 |
| Processor frequency | 800 MHz |
| Memory type | DDR3-SDRAM |
| Internal memory | 256 MB |
| Flash memory | 128 MB |
| Power supply included | Yes |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 31 W |
| Power over Ethernet (PoE) | No |
| Operating temperature (T-T) | 0 - 45 °C |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating relative humidity (H-H) | 15 - 90% |
| Storage relative humidity (H-H) | 10 - 95% |
| Operating altitude | 0 - 3000 m |
| Heat dissipation | 104 BTU/h |
| Width | 443 mm |
| Depth | 254 mm |
| Height | 44.5 mm |
| Weight | 2.81 kg |
| Channel Product Sku | J9856A |
| Certification | FCC; EN 55022/CISPR-22; VCCI |
Write Your Own Review
Not found what you wanted?
Flux IT hardware can help you find the right product quickly and easily. Tell us what you wanted?
In a hurry? Use Live Chat or Call us 01992 576522 now.
Need project equipment purchase pricing or you have multiple items to buy, submit your RFQ.
Why buy from us?
Flux is the future of IT procurement:
- Huge stock of current and EOL products available to ship today
- Fully tested with a choice of warranties available for peace of mind purchasing
- Trade you old equipment for new
- Located close to central London for same day emergency deliveries
- Choice of warranties to meet your requirements
- Short lead time and worldwide deliveries
Looking to Sell?
Flux IT Hardware offers IT Asset Disposition services designed to assist consumers and organizations alike, who are looking to sell their equipment.
- Get a fair market value offer.
- Fast payments via BACS.
- Single or multiple quantities.
In a hurry? Use Live Chat or Call us 01992 576522 now.
See how simple it is:
Looking to buy in larger quantity?
Simply tells us how many units are required. We’ll you get the best pricing and lead time for 5 or more units from our established UK and European network of suppliers.
In a hurry? Use Live Chat or Call us 01992 576522 now.
Project Inquiry & Support
- Get a quote fast
- Project based price savings
- Professional service
Validate your login
Sign In
Create New Account