Out of stock
Only %1 left
Overview
J9148A, an HP Procurve 48 Port Gigabit managed Layer 3 PoE switch.
Hewlett Packard Enterprise ProCurve 2910al-48G-PoE+. Switch type: Managed, Switch layer: L3. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000), Basic switching RJ-45 Ethernet ports quantity: 48, Console port: RJ-45. Full duplex. MAC address table: 16000 entries, Switching capacity: 176 Gbit/s. Networking standards: IEEE 802.3,IEEE 802.3ab,IEEE 802.3u. Power over Ethernet (PoE). Rack mounting, Form factor: 1U
The HP ProCurve 2910al Switch Series consists of four switches: the HP ProCurve 2910al-24G and 2910al-24G-PoE+ Switches with 24 10/100/1000 ports, and the HP ProCurve 2910al-48G and 2910al-48G-PoE+ Switches with 48 10/100/1000 ports. Each switch has four dual-personality ports for 10/100/1000 or mini-GBIC connectivity. In addition, the 2910al switch supports up to four optional 10-Gigabit (CX4 and/or SFP+) ports, thereby offering the most flexible and easy-to-deploy uplinks in its class. Together with static and RIP IPv4 routing, robust security and management, enterprise-class features, free lifetime warranty, and free software updates, the 2910 series is a cost-effective, scalable solution for customers who are building high-performance networks. These switches can be deployed at enterprise edge and remote branch offices, converged networks, and data center top of rack.
The HP ProCurve 2910al Switch Series consists of four switches: the HP ProCurve 2910al-24G and 2910al-24G-PoE+ Switches with 24 10/100/1000 ports, and the HP ProCurve 2910al-48G and 2910al-48G-PoE+ Switches with 48 10/100/1000 ports. Each switch has four dual-personality ports for 10/100/1000 or mini-GBIC connectivity. In addition, the 2910al switch supports up to four optional 10-Gigabit (CX4 and/or SFP+) ports, thereby offering the most flexible and easy-to-deploy uplinks in its class. Together with static and RIP IPv4 routing, robust security and management, enterprise-class features, free lifetime warranty, and free software updates, the 2910 series is a cost-effective, scalable solution for customers who are building high-performance networks. These switches can be deployed at enterprise edge and remote branch offices, converged networks, and data center top of rack.
Rack mounting | Yes |
---|---|
Stackable | Yes |
Form factor | 1U |
Colour of product | Grey |
Safety | EN 60950/IEC 60950; CAN/CSA 22.2 No. 60950; EN 60825; UL 60950. |
Electromagnetic compatibility | FCC part 15 Class A; EN 55022/CISPR-22 Class A; VCCI Class A. |
Switch type | Managed |
Switch layer | L3 |
Quality of Service (QoS) support | Yes |
Web-based management | Yes |
System event log | Yes |
MIB support | MIB II, Bridge MIB, RIPv2 MIB, RMONv2 MIB, SMON MIB, RADIUS Client MIB, RADIUS Accounting MIB, Ethernet-Like-MIB, MAU MIB, Entity MIB, Ping MIB |
Basic switching RJ-45 Ethernet ports quantity | 48 |
Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
Console port | RJ-45 |
Routing entries | 2000 |
Networking standards | IEEE 802.3,IEEE 802.3ab,IEEE 802.3u |
10G support | Yes |
Copper ethernet cabling technology | 10BASE-T,100BASE-TX,1000BASE-T |
Port mirroring | Yes |
Full duplex | Yes |
IP routing | Yes |
Auto MDI/MDI-X | Yes |
Spanning tree protocol | Yes |
Rate limiting | Yes |
Flow control support | Yes |
Link aggregation | Yes |
Auto-sensing | Yes |
VLAN support | Yes |
MAC address table | 16000 entries |
Switching capacity | 176 Gbit/s |
Throughput | 131 Mpps |
Latency (1 Gbps) | 2.9 µs |
Latency (10 Gbps) | 1.3 µs |
Jumbo frames support | Yes |
Packet buffer memory | 6 MB |
DHCP features | DHCP server |
Access Control List (ACL) | Yes |
IGMP snooping | Yes |
SSH/SSL support | Yes |
MAC address filtering | Yes |
Multicast support | Yes |
Built-in processor | Yes |
Processor model | ARM11 |
Processor frequency | 515 MHz |
Memory type | SDRAM |
Internal memory | 512 MB |
Flash memory | 4 MB |
AC input voltage | 100 - 240 V |
AC input frequency | 50 - 60 Hz |
Input current | 6.4 A |
Power consumption (typical) | 556 W |
Power over Ethernet (PoE) | Yes |
Operating temperature (T-T) | 0 - 55 °C |
Storage temperature (T-T) | -40 - 70 °C |
Operating relative humidity (H-H) | 15 - 95% |
Storage relative humidity (H-H) | 15 - 95% |
Heat dissipation | 667 BTU/h |
Width | 442.5 mm |
Depth | 365.8 mm |
Height | 44 mm |
Weight | 5.88 kg |
Product Condition | Empty |
Product Sku | J9148A |
Not found what you wanted?
Flux IT hardware can help you find the right product quickly and easily. Tell us what you wanted?
In a hurry? Use Live Chat or Call us 01992 576522 now.
Need project equipment purchase pricing or you have multiple items to buy, submit your RFQ.
Why buy from us?
Flux is the future of IT procurement:
- Huge stock of current and EOL products available to ship today
- Fully tested with a choice of warranties available for peace of mind purchasing
- Trade you old equipment for new
- Located close to central London for same day emergency deliveries
- Choice of warranties to meet your requirements
- Short lead time and worldwide deliveries
Looking to Sell a J9148A?
Flux IT Hardware offers IT Asset Disposition services designed to assist consumers and organizations alike, who are looking to sell their equipment.
- Get a fair market value offer.
- Fast payments via BACS.
- Single or multiple quantities.
In a hurry? Use Live Chat or Call us 01992 576522 now.
See how simple it is:
Looking to buy J9148A in larger quantity?
Simply tells us how many units are required. We’ll you get the best pricing and lead time for 5 or more units of J9148A from our established UK and European network of suppliers.
In a hurry? Use Live Chat or Call us 01992 576522 now.
Project Inquiry & Support
- Get a quote fast
- Project based price savings
- Professional service