JL076A HP Aruba 3810M 40G 8 HPE Smart Rate PoE+ 1-Slot Switch
SKU
JL076A
Out of stock
Only %1 left
Overview
JL076A, an Aruba 3810M 40G 8 HPE Smart Rate PoE+ 1-Slot switch.
Hewlett Packard Enterprise Aruba 3810M 40G 8 HPE Smart Rate PoE+ 1-slot Switch. Switch type: Managed, Switch layer: L3. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000), Basic switching RJ-45 Ethernet ports quantity: 40, Console port: RJ-45. Full duplex. MAC address table: 64000 entries, Switching capacity: 480 Gbit/s. Networking standards: IEEE 802.3,IEEE 802.3ab,IEEE 802.3at,IEEE 802.3u. Power over Ethernet (PoE). Rack mounting, Form factor: 1U
The Aruba 3810 Switch Series provides performance and resiliency for the mobile-first campus network. Based on a powerful ProVision ASIC and ready for high-speed APs with HPE Smart Rate multi-gigabit Ethernet, the Aruba 3810 delivers a better application experience with low latency, virtualization with resilient stacking technology, and line rate 40GbE for plenty of back haul capacity. The Aruba 3810 has comprehensive Layer 3 features, right size deployment models, and is SDN ready with OpenFlow support. Features Performance and Power for the Mobile-First Campus - The Aruba 3810 Switch Series is an industry leading mobile campus access solution for enterprises, SMBs, and branch office networks. With HPE Smart Rate multi-gigabit ports for high speed 802.11ac devices, the Aruba 3810 will prepare your network for tomorrow. - HPE Smart Rate ports support multi-gigabit Ethernet speeds (1, 2.5, 5, and 10 gigabit Ethernet) on existing cabling for cost-effective and convenient network upgrades with no rip and replace of cabling. - Delivers consistent wired and wireless user experience by supporting unified management tools such as ClearPass Policy Manager and AirWave Network Management. Provides optimal configuration automatically when connected to Aruba APs for PoE priority, VLAN configuration, and rogue AP containment. - Rightsizes deployment and back haul capacity with modular 10GbE and 40GbE uplinks. Full PoE+ provisioning on 48-ports. Dual, redundant, hot-swappable power supplies and innovative backplane stacking technology delivers resiliency and scalability in a convenient 1U form factor. - Advanced Layer 2 and 3 feature set with OSPF, IPv6, IPv4 BGP, robust QoS and policy-based routing are included with no software licensing. With support for OpenFlow, the Aruba 3810 is ready to take advantage of SDN applications such as HPE Network Visualizer, Optimizer, and Protector Applications. Resiliency and High Availability You Can Depend On - The Aruba 3810 Switch Series is designed with a ProVision ASIC designed to enable the mobile campus with SDN optimizations, very low latency, increased packet buffering, and adaptive power consumption. - Backplane stacking technology delivers high-performance stacking with up to 336 Gb/s of stacking throughput and increased resiliency. Up to ten Aruba 3810 switches can be stacked in a ring topology or up to five can be stacking in a mesh topology. - Dual hot-swappable power supplies provide power and allow swapping of modules on the fly to reduce impact on the network availability. More performance with selectable queue configurations and associated memory buffering that best meets requirements of prioritized network applications. - Selectable queue configurations enables increased performance by selecting the number of queues and associated memory buffering that best meet the requirements of the network applications. - Uninterrupted switching and routing for improved application experience and enhanced L3 availability. Supports virtual router redundancy protocol (VRRP) allowing groups of two routers to dynamically back each other up to create highly available router environments in both IPv4 and IPv6 networks. Trusted Security with Unmatched Quality of Service - The Aruba 3810 Switch Series includes robust security and quality of services features to build a mobile campus network that meets corporate policies and compliance requirements. - Flexible traffic controls, such as policy-based routing, QoS, and ACLs, to manage end-to-end application priorities for improved user experience. - Enhanced security and policy-driven application authentication with concurrent 802.1X, MAC and Web Authentication modes. Prevent unwanted traffic with advanced distributed denial of service (DDOS) protection, such as DHCP Snooping, IP Source Guard, and ARP Protection. - Powerful multilevel-access security controls, such as role-based management, configurable password complexity, RADIUS/TACACS+, and SSH for improved security and control change management access. - Industry standard MACsec provides switch-to-switch link level security. Simplify with Unified Management - The Aruba 3810 Switch Series supports ClearPass Policy Manager to provide unified and consistent policy between wired and wireless users. Simplified implementation and management of guest login, user onboarding, network access, security, QoS, and other network policies on the network. - Supports AirWave Network Management software to provide common platform for zero-touch provisioning, management, and monitoring for wired and wireless network devices. - RMON, XRMON and sFlow provide advanced monitoring and reporting capabilities for statistics, history, alarms and events. - Out-of-band Ethernet management port keeps management traffic segmented from your network data traffic.
The Aruba 3810 Switch Series provides performance and resiliency for the mobile-first campus network. Based on a powerful ProVision ASIC and ready for high-speed APs with HPE Smart Rate multi-gigabit Ethernet, the Aruba 3810 delivers a better application experience with low latency, virtualization with resilient stacking technology, and line rate 40GbE for plenty of back haul capacity. The Aruba 3810 has comprehensive Layer 3 features, right size deployment models, and is SDN ready with OpenFlow support. Features Performance and Power for the Mobile-First Campus - The Aruba 3810 Switch Series is an industry leading mobile campus access solution for enterprises, SMBs, and branch office networks. With HPE Smart Rate multi-gigabit ports for high speed 802.11ac devices, the Aruba 3810 will prepare your network for tomorrow. - HPE Smart Rate ports support multi-gigabit Ethernet speeds (1, 2.5, 5, and 10 gigabit Ethernet) on existing cabling for cost-effective and convenient network upgrades with no rip and replace of cabling. - Delivers consistent wired and wireless user experience by supporting unified management tools such as ClearPass Policy Manager and AirWave Network Management. Provides optimal configuration automatically when connected to Aruba APs for PoE priority, VLAN configuration, and rogue AP containment. - Rightsizes deployment and back haul capacity with modular 10GbE and 40GbE uplinks. Full PoE+ provisioning on 48-ports. Dual, redundant, hot-swappable power supplies and innovative backplane stacking technology delivers resiliency and scalability in a convenient 1U form factor. - Advanced Layer 2 and 3 feature set with OSPF, IPv6, IPv4 BGP, robust QoS and policy-based routing are included with no software licensing. With support for OpenFlow, the Aruba 3810 is ready to take advantage of SDN applications such as HPE Network Visualizer, Optimizer, and Protector Applications. Resiliency and High Availability You Can Depend On - The Aruba 3810 Switch Series is designed with a ProVision ASIC designed to enable the mobile campus with SDN optimizations, very low latency, increased packet buffering, and adaptive power consumption. - Backplane stacking technology delivers high-performance stacking with up to 336 Gb/s of stacking throughput and increased resiliency. Up to ten Aruba 3810 switches can be stacked in a ring topology or up to five can be stacking in a mesh topology. - Dual hot-swappable power supplies provide power and allow swapping of modules on the fly to reduce impact on the network availability. More performance with selectable queue configurations and associated memory buffering that best meets requirements of prioritized network applications. - Selectable queue configurations enables increased performance by selecting the number of queues and associated memory buffering that best meet the requirements of the network applications. - Uninterrupted switching and routing for improved application experience and enhanced L3 availability. Supports virtual router redundancy protocol (VRRP) allowing groups of two routers to dynamically back each other up to create highly available router environments in both IPv4 and IPv6 networks. Trusted Security with Unmatched Quality of Service - The Aruba 3810 Switch Series includes robust security and quality of services features to build a mobile campus network that meets corporate policies and compliance requirements. - Flexible traffic controls, such as policy-based routing, QoS, and ACLs, to manage end-to-end application priorities for improved user experience. - Enhanced security and policy-driven application authentication with concurrent 802.1X, MAC and Web Authentication modes. Prevent unwanted traffic with advanced distributed denial of service (DDOS) protection, such as DHCP Snooping, IP Source Guard, and ARP Protection. - Powerful multilevel-access security controls, such as role-based management, configurable password complexity, RADIUS/TACACS+, and SSH for improved security and control change management access. - Industry standard MACsec provides switch-to-switch link level security. Simplify with Unified Management - The Aruba 3810 Switch Series supports ClearPass Policy Manager to provide unified and consistent policy between wired and wireless users. Simplified implementation and management of guest login, user onboarding, network access, security, QoS, and other network policies on the network. - Supports AirWave Network Management software to provide common platform for zero-touch provisioning, management, and monitoring for wired and wireless network devices. - RMON, XRMON and sFlow provide advanced monitoring and reporting capabilities for statistics, history, alarms and events. - Out-of-band Ethernet management port keeps management traffic segmented from your network data traffic.
Rack mounting | Yes |
---|---|
Stackable | Yes |
Form factor | 1U |
Product colour | Black |
Switch type | Managed |
Switch layer | L3 |
Quality of Service (QoS) support | Yes |
Web-based management | Yes |
Console port | RJ-45 |
Basic switching RJ-45 Ethernet ports quantity | 40 |
Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
IP routing | Yes |
Auto-sensing | Yes |
Networking standards | IEEE 802.3,IEEE 802.3ab,IEEE 802.3at,IEEE 802.3u |
10G support | Yes |
Copper ethernet cabling technology | 10BASE-T,100BASE-TX,1000BASE-T |
Full duplex | Yes |
Link aggregation | Yes |
Auto MDI/MDI-X | Yes |
Spanning tree protocol | Yes |
VLAN support | Yes |
Latency (1 Gbps) | 2.8 µs |
MAC address table | 64000 entries |
Switching capacity | 480 Gbit/s |
Throughput | 273.8 Mpps |
Latency (10 Gbps) | 1.8 µs |
Jumbo frames support | Yes |
Packet buffer memory | 13.5 MB |
DHCP features | DHCP server |
Access Control List (ACL) | Yes |
Virtual stacking (units) | 10 |
Built-in processor | Yes |
Processor frequency | 1000 MHz |
Memory type | DDR3-SDRAM |
Internal memory | 2048 MB |
Power over Ethernet (PoE) | Yes |
Operating temperature (T-T) | 0 - 45 °C |
Storage temperature (T-T) | -40 - 70 °C |
Operating relative humidity (H-H) | 15 - 95% |
Storage relative humidity (H-H) | 15 - 90% |
Width | 442.5 mm |
Depth | 431.3 mm |
Height | 43.9 mm |
Weight | 6.17 kg |
Channel Product Sku | JL076A |
Write Your Own Review
Not found what you wanted?
Flux IT hardware can help you find the right product quickly and easily. Tell us what you wanted?
In a hurry? Use Live Chat or Call us 01992 576522 now.
Need project equipment purchase pricing or you have multiple items to buy, submit your RFQ.
Why buy from us?
Flux is the future of IT procurement:
- Huge stock of current and EOL products available to ship today
- Fully tested with a choice of warranties available for peace of mind purchasing
- Trade you old equipment for new
- Located close to central London for same day emergency deliveries
- Choice of warranties to meet your requirements
- Short lead time and worldwide deliveries
Looking to Sell?
Flux IT Hardware offers IT Asset Disposition services designed to assist consumers and organizations alike, who are looking to sell their equipment.
- Get a fair market value offer.
- Fast payments via BACS.
- Single or multiple quantities.
In a hurry? Use Live Chat or Call us 01992 576522 now.
See how simple it is:
Looking to buy in larger quantity?
Simply tells us how many units are required. We’ll you get the best pricing and lead time for 5 or more units from our established UK and European network of suppliers.
In a hurry? Use Live Chat or Call us 01992 576522 now.
Project Inquiry & Support
- Get a quote fast
- Project based price savings
- Professional service
Validate your login
Sign In
Create New Account