WS-X6904-40G-2TXL Cisco Catalyst 6900 Switch 4 Port 40 Gigabit Ethernet Expansion Module
SKU
WS-X6904-40G-2TXL
Out of stock
Only %1 left
Overview
WS-X6904-40G-2TXL, a Cisco Catalyst 6900 switch 4 port gigabit expansion module, w/ DFC4-EXL.
Why you should choose a Cisco new or refurbished switch?
Why you should choose a Cisco new or refurbished switch?
Cisco WS-X6904-40G-2TXL. Ethernet LAN data rates: 40000 Mbit/s, Networking standards: IEEE 802.1D,IEEE 802.1Q,IEEE 802.1p,IEEE 802.1s,IEEE 802.1w,IEEE 802.3ad,IEEE 802.3ae,IEEE.... Fiber optic connector: MPO,SC, Fiber type: Multi-mode, Transmission distance (max): 10 km. MAC address table: 128000 entries, Switching capacity: 80 Gbit/s, Forwarding rate: 60 Mpps. Buffer size per port: 10 MB, Compatibility: Cisco Catalyst 6900. Management platform: IGMPv3
Cisco® Catalyst® 6500 Series Switches offer a variety of Ethernet modules to serve different needs in the campus and data center for enterprise, commercial, and service provider customers. The Cisco Catalyst 6904 4-Port 40 Gigabit Ethernet Fiber Module (Figure 1), fully compliant with the IEEE 802.3ba standard, complements this product portfolio.
The module is designed to meet the increasing demand for aggregation of 10 Gigabit Ethernet on campus and data center, as well as for high-density 10 Gigabit Ethernet and 40 Gigabit Ethernet transport in the core.
Each port can accept a 40 Gigabit Ethernet C Form-Factor Pluggable (CFP) optics module or be converted to four ports of 10 Gigabit Ethernet with a FourX adapter, enabling customers to deploy 10 Gigabit Ethernet to meet current needs and be ready to transition to 40 Gigabit Ethernet without any disruption. The module can also be used in mixed mode, where one side of the card uses two CFP modules for 2 times 40 Gigabit Ethernet ports and the other side uses two FourX adapters for 8 times 10 Gigabit Ethernet ports.
The Cisco Catalyst 6900 Series 4-Port 40 Gigabit Ethernet Fiber Module is compatible only with Cisco Catalyst 6500 Supervisor Engine 2T.
Cisco® Catalyst® 6500 Series Switches offer a variety of Ethernet modules to serve different needs in the campus and data center for enterprise, commercial, and service provider customers. The Cisco Catalyst 6904 4-Port 40 Gigabit Ethernet Fiber Module (Figure 1), fully compliant with the IEEE 802.3ba standard, complements this product portfolio.
The module is designed to meet the increasing demand for aggregation of 10 Gigabit Ethernet on campus and data center, as well as for high-density 10 Gigabit Ethernet and 40 Gigabit Ethernet transport in the core.
Each port can accept a 40 Gigabit Ethernet C Form-Factor Pluggable (CFP) optics module or be converted to four ports of 10 Gigabit Ethernet with a FourX adapter, enabling customers to deploy 10 Gigabit Ethernet to meet current needs and be ready to transition to 40 Gigabit Ethernet without any disruption. The module can also be used in mixed mode, where one side of the card uses two CFP modules for 2 times 40 Gigabit Ethernet ports and the other side uses two FourX adapters for 8 times 10 Gigabit Ethernet ports.
The Cisco Catalyst 6900 Series 4-Port 40 Gigabit Ethernet Fiber Module is compatible only with Cisco Catalyst 6500 Supervisor Engine 2T.
Ethernet LAN data rates | 40000 Mbit/s |
---|---|
Full duplex | Yes |
Networking standards | IEEE 802.1D,IEEE 802.1Q,IEEE 802.1p,IEEE 802.1s,IEEE 802.1w,IEEE 802.3ad,IEEE 802.3ae,IEEE 802.3an,IEEE 802.3ba,IEEE 802.3x |
Jumbo frames support | Yes |
Transmission distance (max) | 10 km |
Fiber type | Multi-mode |
Fiber optic connector | MPO,SC |
Number of multicast groups | 256000 |
Forwarding rate | 60 Mpps |
MAC address table | 128000 entries |
Switching capacity | 80 Gbit/s |
Number of VLANs | 4000 |
Fiber ports quantity | 4 |
Buffer size per port | 10 MB |
Compatibility | Cisco Catalyst 6900 |
Quality of Service (QoS) support | Yes |
Management platform | IGMPv3 |
Access Control List (ACL) | Yes |
Power consumption (typical) | 483 W |
Safety | UL 60950-1, CAN/CSA C22.2 No. 60950, EN 60950-1, IEC 60950-1, AS/NZS 60950-1 |
Electromagnetic compatibility | FCC Part 15 (CFR 47) Class A, ICES-003 Class A, VCCI Class A, EN55022 Class A, EN55024, CISPR24, CISPR 22 Class A, AS/NZS CISPR 22 Class A, ETS 300 386, KN 22 Class A, EN61000-3-2, EN61000-3-3, CNS13438 Class A |
Operating relative humidity (H-H) | 10 - 90% |
Operating temperature (T-T) | 0 - 40 °C |
Storage temperature (T-T) | -40 - 75 °C |
Weight | 5.44 kg |
Dimensions (WxDxH) | 356 x 406 x 44 mm |
Channel Product Sku | WS-X6904-40G-2TXL |
Write Your Own Review
Not found what you wanted?
Flux IT hardware can help you find the right product quickly and easily. Tell us what you wanted?
In a hurry? Use Live Chat or Call us 01992 576522 now.
Need project equipment purchase pricing or you have multiple items to buy, submit your RFQ.
Why buy from us?
Flux is the future of IT procurement:
- Huge stock of current and EOL products available to ship today
- Fully tested with a choice of warranties available for peace of mind purchasing
- Trade you old equipment for new
- Located close to central London for same day emergency deliveries
- Choice of warranties to meet your requirements
- Short lead time and worldwide deliveries
Looking to Sell?
Flux IT Hardware offers IT Asset Disposition services designed to assist consumers and organizations alike, who are looking to sell their equipment.
- Get a fair market value offer.
- Fast payments via BACS.
- Single or multiple quantities.
In a hurry? Use Live Chat or Call us 01992 576522 now.
See how simple it is:
Looking to buy in larger quantity?
Simply tells us how many units are required. We’ll you get the best pricing and lead time for 5 or more units from our established UK and European network of suppliers.
In a hurry? Use Live Chat or Call us 01992 576522 now.
Project Inquiry & Support
- Get a quote fast
- Project based price savings
- Professional service
Validate your login
Sign In
Create New Account